Flamant BulleExterior cleaning

Pressure or soft washing: which method for which surface?

By Scott Lanthier, president, a roofer for 10 years · published on November 21, 2026

High pressure suits hard mineral surfaces such as concrete. For an asphalt shingle roof, vinyl siding or fragile masonry, soft washing is used: low pressure and a solution that eliminates algae and mildew. Wood and interlocking pavers call for moderate pressure and a lot of care.

The principle in one sentence

High pressure removes dirt by force; soft washing removes it with chemistry. The more fragile a surface, the more chemistry replaces force.

Surface by surface

SurfaceMethodWhy
Asphalt shingle roofSoft washingThe manufacturers' association (ARMA) advises against high pressure: it strips the granules and wears the roof prematurely.
Vinyl sidingSoft washingPressure can force water behind the panels, which promotes mildew; some manufacturers prohibit it.
Brick and stoneSoft washing, very low pressureAbove roughly 700 psi, mortar joints and the brick face can be damaged (Meridian Brick).
Wood deck and fenceLow pressure, wide nozzleToo much pressure lifts the fibres; work along the grain.
Interlocking paversControlled pressure, angled sprayThe spray must stay perpendicular to the joints so the polymeric sand isn't dislodged (Permacon).
ConcreteHigh pressureA hard surface that can take it, around 2,500 to 3,000 psi according to consumer guides.

The most common trap: pressure washing a roof

A roof that looks lighter after a high-pressure wash has often lost some of its granules, the mineral layer that protects the asphalt from the sun. It looks good for a few weeks and costs a lot in the long run. That is why the shingle industry recommends a diluted bleach solution rather than the force of water.

And gutters and windows?

The outer faces of gutters are treated like siding, with soft washing. Windows are cleaned with pure water or with a scrubber and squeegee, never with pressure.

Frequently asked questions

Can an asphalt shingle roof be pressure washed? +

No. The Asphalt Roofing Manufacturers Association (ARMA) advises against high pressure, which strips the protective granules.

Is soft washing less effective? +

No, it is more effective on algae and mildew because it eliminates them instead of just scraping them off. On oil-stained concrete, however, pressure remains the basic tool.

Sources