Flamant BulleExterior cleaning

Guides

What to know before washing the outside of a house, backed by manufacturers, public agencies and municipal bylaws.

Pressure or soft washing: which method for which surface?

High pressure suits hard mineral surfaces such as concrete. For an asphalt shingle roof, vinyl siding or fragile masonry, soft washing is used: low pressure and a solution that eliminates algae and mildew. Wood and interlocking pavers call for moderate pressure and a lot of care.

→

Black streaks on the roof: what they are and how to get rid of them

Black streaks on asphalt shingle roofs are mostly caused by Gloeocapsa magma, a cyanobacterium common in the United States and Canada. They appear first on north-facing and shaded slopes. They are removed by soft washing with a diluted chlorine solution, never with high pressure, and they eventually come back over time.

→

Cleaning interlocking pavers without losing the polymeric sand

Interlocking pavers can be pressure washed, but with a spray angled at about 30 degrees and perpendicular to the joints, so the polymeric sand isn't dislodged. If the joints are damaged, at least 1½ inches of old sand are removed before adding new sand, in summer. A sealer only goes on perfectly dry sand.

→

Why pure water cleans windows without leaving spots

Tap water leaves spots because its dissolved minerals stay on the glass as it evaporates. Pure water, filtered by reverse osmosis and then deionized to close to 0 ppm, has no minerals left: it dries spot-free. With a telescopic pole, upper-floor windows are cleaned from the ground.

→

Washing your driveway, patio or walls: what towns allow

Municipal bylaws on washing with drinking water, town by town, read in the official text.

→