Flamant BulleExterior cleaning

Why pure water cleans windows without leaving spots

By Scott Lanthier, president, a roofer for 10 years · published on November 21, 2026

Tap water leaves spots because its dissolved minerals stay on the glass as it evaporates. Pure water, filtered by reverse osmosis and then deionized to close to 0 ppm, has no minerals left: it dries spot-free. With a telescopic pole, upper-floor windows are cleaned from the ground.

Where the spots come from

Water contains dissolved solids, measured in parts per million (ppm). When a drop dries, the water leaves and the minerals stay: those are the small white spots you see in the sun.

How pure water is made

  1. Sediment filter: it catches particles.
  2. Carbon filter: it removes chlorine, which would damage the membrane.
  3. Reverse osmosis: a membrane removes the vast majority of dissolved impurities.
  4. Deionization: a resin captures what's left, down to close to 0 ppm.

A detail few people know: reverse osmosis produces less water when the water is cold. In a Quebec spring, that has to be planned for.

A pole instead of a ladder

Pure water runs through a telescopic pole ending in a brush. Scrub, rinse, and the glass dries on its own. Second- and third-floor windows are cleaned with feet on the ground, which avoids working at height: in Quebec, fall protection is mandatory as soon as a worker is exposed to a fall of more than 3 metres.

The honest limits

  • The pole cleans the outside; the inside is done by hand.
  • Old hard-water deposits may have marked the glass permanently: no cleaning will remove them completely.

Frequently asked questions

Does pure water really clean without soap? +

Yes, for everyday dirt: pure water dissolves and carries away deposits, then dries without leaving minerals.

How often should windows be cleaned? +

For most homes, twice a year: in spring after the pollen and in fall before winter.

Sources