Soft washing
Does soft washing damage shingles? +
No, it's precisely the method that protects them: low pressure and a solution that eliminates algae. High pressure strips the granules, and the shingle manufacturers' association advises against it.
Do the black streaks come back? +
Yes, over time. Cleaning eliminates the algae present but doesn't make the roof immune. North-facing and shaded slopes are the first to discolour again.
Can a brick house be washed? +
Yes, at low pressure. Too much pressure can damage mortar joints and the face of the brick. Muriatic acid should be avoided.
What about my plants? +
They must be protected during the wash. The details of our protocol will be published here once confirmed.
Pressure washing
Can interlocking pavers be pressure washed? +
Yes, but only with care: an angled spray perpendicular to the joints, so the polymeric sand isn't dislodged. The manufacturer Permacon reserves it for experienced professionals.
What pressure for a wood deck? +
Low pressure and a wide nozzle, along the grain. Too much pressure lifts the wood fibres.
Do you pressure wash roofs? +
No. An asphalt shingle roof is cleaned by soft washing, at low pressure. High pressure strips the granules.
Am I allowed to wash my driveway? +
It depends on your town and the time of year. Many municipalities regulate driveway washing with drinking water. Check your city's page.
Gutters
Do you clean gutters only? +
Yes, it's possible, but we mainly recommend it with a full wash: roof, siding and windows. The result is more even.
Can you remove the black streaks on my gutters? +
Yes, by soft washing the outer faces. The result depends on the age and condition of the aluminum finish.
Window cleaning
Do you clean the inside of the windows? +
Yes, inside and out, as well as frames, sills and screens.
Do I need to be home? +
Not necessarily for the outside. For the inside, yes, since we need to come in.
Do you clean storefronts? +
Yes, for businesses, buildings and condominiums.
Pressure or soft washing: which method for which surface?
Can an asphalt shingle roof be pressure washed? +
No. The Asphalt Roofing Manufacturers Association (ARMA) advises against high pressure, which strips the protective granules.
Is soft washing less effective? +
No, it is more effective on algae and mildew because it eliminates them instead of just scraping them off. On oil-stained concrete, however, pressure remains the basic tool.
Black streaks on the roof: what they are and how to get rid of them
Do black streaks damage the roof? +
Mostly they hurt its appearance. Effects on shingle lifespan are mentioned but less well documented. The real risk comes from improper high-pressure cleaning.
Why is only one side of the roof stained? +
Because the cyanobacterium needs moisture: it settles first on north-facing and shaded slopes, which dry more slowly.
How long does a cleaning last? +
Several years depending on shade and moisture, but the stains eventually return.
Cleaning interlocking pavers without losing the polymeric sand
Does the sand need redoing after a wash? +
Only if the joints were dug out or were already damaged. A proper wash, angled and perpendicular to the joints, preserves them.
Can I seal right after washing? +
No, wait until the sand is perfectly dry.
Why pure water cleans windows without leaving spots
Does pure water really clean without soap? +
Yes, for everyday dirt: pure water dissolves and carries away deposits, then dries without leaving minerals.
How often should windows be cleaned? +
For most homes, twice a year: in spring after the pollen and in fall before winter.